Battery Selector

Industrial Lithium Batteries

We offer over 600 models of industrial lithium-ion batteries for nearly every make and model of electric industrial trucks.

Battery Selector

Li-ion battery for Class I lift trucks

Electric motor rider trucks are used for loading/unloading tractor-trailers. They are used primarily for handling pallets.

These batteries will satisfy the most stringent requirements for power and dependability for sit-down 3- and 4-wheel lifts and dock stockers. They tend to be low in height (usually 22.5”) and quite heavy (usually 1800-5500 lbs) as they also serve as a counterbalance for the truck. The Class I lift truck is the “workhorse” of the American economy. OneCharge batteries just do the job and don’t require a lot of attention. As more and more companies choose to move from fuel-powered trucks to electric-powered trucks (from Class IV & V to Class I), this has become the most popular OneCharge product.

Li-ion battery for Class II lift trucks

Electric motor narrow aisle trucks operate in tight spaces, handling pallets and picking/storing inventory.

These batteries will satisfy the most stringent requirements for power and dependability for narrow, very narrow aisle and specialty trucks. They are tall (29.5”) and thin (<30.5”) by design. Using powerful OneCharge Li-ion batteries, you can put more power in the same or smaller compartment space, and take advantage of short wheelbase trucks by reducing aisle widths to add more pallet positions in your warehouse.

Li-ion battery for Class III lift trucks

Electric motor hand trucks or hand/rider trucks are used for unloading deliveries from tractor-trailers; they often do short runs in smaller spaces.

These batteries will satisfy the most stringent requirements for power and dependability for pallet jacks and walkie stackers. Available offerings are similar to Class II, but can be made much lighter than their lead-acid counterparts. The weight is enough to keep the drive wheel in touch with the ground, without the extra weight of lead-acid. These OneCharge batteries are tall (22.5, 26.0 & 29.5”) and thin (7.5 -30.5”); and can weigh as little as 290lbs; and normally use a standalone 480V, 3-phase charger. Some models are offered with a 110V, 56A output built-in charger (BIC) when portability is required.


Lithium batteries to fit most applications

The OneCharge AMERICAN STANDARD Battery is a true workhorse of the American economy. A standard lithium battery that gets extraordinary results. These batteries have demonstrated high dependability and performance in many material handling applications across North and South America.

POWER Series
(Class I, II)

Li-ion batteries for heavy applications

High-capacity OneCharge POWER batteries guarantee operations without disruption for the most demanding applications dealing with heavy loads (the beverage-distribution, paper, lumber, and metal industries), high lift heights (very narrow aisle applications), massive attachments (paper roll clamps, push-pull, single-double).

(Class I, II, III)


Lithium batteries for Aisle Master and Combilift electric lift trucks

OneCharge’s CUSTOM Series of lithium forklift batteries consists of over 50 different models to fit all Aisle Master and Combilift electric lifts. All products are equipped with battery-to-truck communication using the CAN protocol. Lift truck models that require dual cases are usually equipped with all of the required power (and more) in one case, with ballast alone in the other!


FROST Series
(Class I, II, III)

Li-ion batteries for coolers and freezers

OneCharge FROST I and II batteries are solutions for lifts working with products that must be stored in a cooler or freezer. OneCharge FROST batteries will maintain 95% of their rated capacity even at extremely low operating temperatures. Conventional lead acid-batteries lose 30-50% of their capacity when operating in such harsh conditions, and discharge quickly.



Lithium batteries for electric pallet jacks

These lightweight but powerful lithium batteries keep your equipment ready anytime you need it up to 3 shifts a day. Ideal for any warehouse, manufacturing and box truck deliveries.

Sweepers and scrubbers (drop-in solutions)

Floor sweepers and cleaners for heavy-duty cleaning applications are generally used on hard floors such as concrete, asphalt, and others.

These batteries will satisfy the most stringent requirements for power and dependability for (drop-in) sweeper and scrubber applications. They have a high Ah capacity and are lightweight, as a counterbalance is not required. Sweepers and scrubbers work in areas that tend to be dirty and moist and can take advantage of our TS1 Seal Kit to minimize dust and moisture entering the battery and BMS, improving its ingress protection (IP). Pressure washing of a battery is NOT recommended.

Automatic guided vehicles (AGVs)

AGVs are autonomous vehicles used to transport materials or accomplish specific tasks in many different industrial settings — such as manufacturing and product assembly, warehousing, material handling, food and beverage, etc.

These batteries will satisfy the most stringent requirements for power and dependability for (drop-in) AGV applications. Available offerings for this emerging and rapidly growing segment tend to be a combination of Class I & II offerings. Lightweight and small, they will fit in a variety of computer-driven equipment similar to pallet jacks, stackers, and tugs. Absent an operator, they are scheduled for charging at regular intervals.

Airport ground support equipment (GSE)

Ground support equipment (GSE)

GSE is defined as all off-road airport equipment used on the aircraft side at an airport. Aircraft ground support equipment includes pushback tugs, baggage and cargo tractors, carts, lifts, forklifts, ground power units, air-conditioning units, and belt loaders.